| Scope | Estimated range |
|---|---|
| 24 x 36 in | $210 – $430 |
| 30 x 48 in | $260 – $520 |
| 32 x 60 in | $300 – $610 |
| 36 x 72 in | $360 – $760 |
| Custom oversize | $580 – $1,250 |
Ranges reflect installed cost including materials and labor for typical residential work. The low end of each range corresponds to a basic vinyl configuration; the high end reflects premium frames, upgraded glazing, and larger units. Last reviewed 2026-11-12.
Single-hung has a fixed upper sash with no balances, no latch, and no weatherstrip at the top. Fewer moving parts means fewer failure points and lower cost, and it is why single-hung is the default in budget whole-house packages.
This is the tradeoff people forget. The exterior of the upper sash must be reached from outside, which matters on second-story windows and on homes where the exterior is difficult to access.
A single-hung opens to roughly 50% of the window area, and warm air stratifies at the ceiling rather than exhausting through the top. In rooms without cross-ventilation, this is a real comfort difference.
Yes. Fewer moving parts means less to fail. The most common repair is the lower sash latch or the weatherstrip, both inexpensive. Single-hung units have no upper balance system to replace.
Not meaningfully in most markets. Buyers notice window condition and energy performance more than the specific type. In higher-end markets where double-hung is the local norm, a mismatch can be noticed.
A single-hung unit can meet egress only if its clear opening meets the local minimum and the sash can be fully opened. Many single-hung units cannot, which is why egress is usually specified as casement or slider.